WHY SHOULD SPC WALL PANEL BE INSTALLED LIKE THIS?

一、There are some customers who asked if SPC wall panel can be installed on walls with cement or with ceramic tiles?The answer is certainly “YES”.Only if you can make sure the wall is flat.

二、The next important part is that just make sure that you choose the right and exact silicone sealant.

Why not use regular glue?The regular glue has “acid” and the raw material of base board has “calcium carbonate”.”Acid” abd “calcium carbonate” will produce chemical reaction.

The characteristics,usage,guide and instructions of silicone sealant can explain it more clearly.

(1).Product Characteristics:

A one-component product, neutral curing with excellent adhesion,high strength high modulus high flexible.

For most building materials has excellent adhesive sealing performance without bottom coating and has good flexibility watertight and other functions.

Curing is a kind of elastomer with heat resistant cold resistant and non-corrosion to building materials, It has excellent weather resistance,aging resistance, ultraviolet resistance ozone resistance and high temperature resistance performances and no pollution to the environment.

Good compatibility with Other silicone sealants which are produced by GREEN HEALTH company.

(2).Main Usage :

1. Weatherproof sealing the glass curtain wall, stone wall, marble, aluminum curtain wall and metal curtain engineering.

2. Applicable to edge sealing and other types of construction and industrial seal.

(3).Construction Guide :

1. Can't be used for structural bonding assembly.

2. Don't apply to all of the surface with exudation grease, plasticize and solvent.

3. Should not be used confined space or direct contact to the surface of food or drinking water.

4. Can't construct when the material surface temperature lower than 4 DEG C or more than 40 DEGC.

5. Can't adhesive the materials containing copper or copper alloy.

(4).Safety Instructions :

The workplace should pay attention to maintain good ventilation.

Before this product curing should avoid contact with eyes, if contact with eyes, please rinse with plenty of water, then ask the doctor to check.

After fully cured the product will not release harmful substances nor has damage effect to the skin.

Before using this product, users must carry on the compatibility and adhesive test first, confirm the product and substrate can meet construction

company only to give assurance to whether the products meet the quality requirements, the company shall not be responsible for loss in the process of use due to any accident and improper use.

三、Installation steps:

For installing easily and successfully,here attaching installation steps for reference:

Step 1:Measuring the length of moldings needed 

Step 2:Cutting,using aluminum saw or angle grinder

Step 3:Pressing the moldings into seams of board

Step 4:Fixing aluminum strips by brad nailer

Step 5:Installing the boards for a trial to check if it’s suitable

Step 6:Putting on the nail-free glue or structural adhesive

Step 7:Installing the boards formally,pressing on and tearing off protective film